A study to determine the optimum design of a photographic film for the lunar surface hand-held camera Final report

Design, and processing of photographic film for lunar surface hand operated camer

Spin-Orbit Coupling in Iridium-Based 5d Compounds Probed by X-ray Absorption Spectroscopy

We have performed x-ray absorption spectroscopy (XAS) measurements on a series of Ir-based 5d transition metal compounds, including Ir, IrCl3, IrO2, Na2IrO3, Sr2IrO4, and Y2Ir2O7. By comparing the intensity of the "white-line" features observed at the Ir L2 and L3 absorption edges, it is possible to extract valuable information about the strength of the spin-orbit coupling in these systems. We observe remarkably large, non-statistical branching ratios in all Ir compounds studied, with little or no dependence on chemical composition, crystal structure, or electronic state. This result confirms the presence of strong spin-orbit coupling effects in novel iridates such as Sr2IrO4, Na2IrO3, and Y2Ir2O7, and suggests that even simple Ir-based compounds such as IrO2 and IrCl3 may warrant further study. In contrast, XAS measurements on Re-based 5d compounds, such as Re, ReO2, ReO3, and Ba2FeReO6, reveal statistical branching ratios and negligible spin-orbit coupling effects.Comment: 9 pages, 4 figure

Long slit spectroscopy of NH2 in comets Halley, Wilson, and Nishikawa-Takamizawa-Tago

Long-slit spectra of comets Halley, Wilson and Nishikawa-Takamizawa-Tago were obtained with the 3.9 meter Anglo-Australian Telescope. Spectra of comets Halley and Wilson were obtained with the IPCS at a spectral resolution of 0.5 A and a spatial resolution of 10(exp 3) km. Spectra of comets Wilson and Nishikawa-Takamizawa-Tago were obtained with a CCD at a spectral resolution of 1.5 A and a spatial resolution of approximately 3 x 10(exp 3) km. Surface brightness profiles for NH2 were extracted from the long-slit spectra of each comet. The observed surface brightness profiles extend along the slit to approximately 6 x 10(exp 4) km from the nucleus in both sunward and tailward directions. By comparing surface distribution calculated from an appropriate coma model with observed surface brightness distributions, the photodissociation timescale of the parent molecule of NH2 can be inferred. The observed NH2 surface brightness profiles in all three comets compares well with a surface brightness profile calculated using the vectorial model, an NH3 photodissociation timescale of 7 x 10(exp 3) seconds, and an NH2 photodissociation timescale of 34,000 seconds

Electronic properties of silica nanowires

Thin nanowires of silicon oxide were studied by pseudopotential density functional electronic structure calculations using the generalized gradient approximation. Infinite linear and zigzag Si-O chains were investigated. A wire composed of three-dimensional periodically repeated Si4O8 units was also optimized, but this structure was found to be of limited stability. The geometry, electronic structure, and Hirshfeld charges of these silicon oxide nanowires were computed. The results show that the Si-O chain is metallic, whereas the zigzag chain and the Si4O8 nanowire are insulators

Magneto-elastic coupling and unconventional magnetic ordering in triangular multiferroic AgCrS2

The temperature evolution of the crystal and magnetic structures of ferroelectric sulfide AgCrS2 have been investigated by means of neutron scattering. AgCrS2 undergoes at TN = 41.6 K a first-order phase transition, from a paramagnetic rhombohedral R3m to an antiferromagnetic monoclinic structure with a polar Cm space group. In addition to being ferroelectric below TN, the low temperature phase of AgCrS2 exhibits an unconventional collinear magnetic structure that can be described as double ferromagnetic stripes coupled antiferromagnetically, with the magnetic moment of Cr+3 oriented along b within the anisotropic triangular plane. The magnetic couplings stabilizing this structure are discussed using inelastic neutron scattering results. Ferroelectricity below TN in AgCrS2 can possibly be explained in terms of atomic displacements at the magneto-elastic induced structural distortion. These results contrast with the behavior of the parent frustrated antiferromagnet and spin-driven ferroelectric AgCrO2

Simulation of thermal conductivity and heat transport in solids

Using molecular dynamics (MD) with classical interaction potentials we present calculations of thermal conductivity and heat transport in crystals and glasses. Inducing shock waves and heat pulses into the systems we study the spreading of energy and temperature over the configurations. Phonon decay is investigated by exciting single modes in the structures and monitoring the time evolution of the amplitude using MD in a microcanonical ensemble. As examples, crystalline and amorphous modifications of Selenium and $\rm{SiO_2}$ are considered.Comment: Revtex, 8 pages, 11 postscript figures, accepted for publication in PR

Ab initio studies of phonon softening and high pressure phase transitions of alpha-quartz SiO2

Density functional perturbation theory calculations of alpha-quartz using extended norm conserving pseudopotentials have been used to study the elastic properties and phonon dispersion relations along various high symmetry directions as a function of bulk, uniaxial and non-hydrostatic pressure. The computed equation of state, elastic constants and phonon frequencies are found to be in good agreement with available experimental data. A zone boundary (1/3, 1/3, 0) K-point phonon mode becomes soft for pressures above P=32 GPa. Around the same pressure, studies of the Born stability criteria reveal that the structure is mechanically unstable. The phonon and elastic softening are related to the high pressure phase transitions and amorphization of quartz and these studies suggest that the mean transition pressure is lowered under non-hydrostatic conditions. Application of uniaxial pressure, results in a post-quartz crystalline monoclinic C2 structural transition in the vicinity of the K-point instability. This structure, intermediate between quartz and stishovite has two-thirds of the silicon atoms in octahedral coordination while the remaining silicon atoms remain tetrahedrally coordinated. This novel monoclinic C2 polymorph of silica, which is found to be metastable under ambient conditions, is possibly one of the several competing dense forms of silica containing octahedrally coordinated silicon. The possible role of high pressure ferroelastic phases in causing pressure induced amorphization in silica are discussed.Comment: 17 pages, 8 figs., 8 Table

Mechanism of Thermal Atomic Layer Etch of W Metal Using Sequential Oxidation and Chlorination:A First-Principles Study

Thermal atomic layer etch (ALE) of W metal can be achieved by sequential self-limiting oxidation and chlorination reactions at elevated temperatures. In this paper, we analyze the reaction mechanisms of W ALE using the first-principles simulation. We show that oxidizing agents such as O2, O3, and N2O can be used to produce a WOx surface layer in the first step of an ALE process with ozone being the most reactive. While the oxidation pulse on clean W is very exergonic, our study suggests that runaway oxidation of W is not thermodynamically favorable. In the second ALE pulse, WCl6 and Cl2 remove the oxidized surface W atoms by the formation of volatile tungsten oxychloride (WxOyClz) species. In this pulse, each adsorbed WCl6 molecule was found to remove one surface W atom with a moderate energy cost. Our calculations further show that the desorption of the additional etch products is endothermic by up to 4.7 eV. Our findings are consistent with the high temperatures needed to produce ALE in experiments. In total, our quantum chemical calculations have identified the lowest energy pathways for ALE of tungsten metal along with the most likely etch products, and these findings may help guide the development of improved etch reagents

Excitonic effects in the optical properties of SiC sheet and nanotubes

The quasiparticle band structure and optical properties of single-walled zigzag and armchair SiC nanotubes (SiC-NTs) as well as single SiC sheet are investigated by ab initio many-body calculations using the GW and the GW plus Bethe-Salpeter equation (GW+BSE) approaches, respectively. Significant GW quasiparticle corrections of more than 1.0 eV to the Kohn-Sham band gaps from the local density approximation (LDA) calculations are found. The GW self-energy corrections transform the SiC sheet from a indirect LDA band gap to a direct band gap material. Furthermore, the quasiparticle band gaps of SiC-NTs with different chiralities behave very differently as a function of tube diameter, and this can be attributed to the difference in the curvature-induced orbital rehybridization between the different chiral nanotubes. The calculated optical absorption spectra are dominated by discrete exciton peaks due to exciton states with large binding energy up to 2.0 eV in the SiC sheet and SiC-NTs. The formation of strongly bound excitons is attributed to the enhanced electron-hole interaction in these low dimensional systems. Remarkably, the excited electron amplitude of the exciton wavefunction is found to peak on the Si atoms near the hole position (which is on the C site) in the zigzag SiC-NTs, indicating a charge transfer from an anion (hole) to its neighboring cations by photoexcitation. In contrast, this pronounced peak structure disappear in the exciton wavefunction in the armchair SiC-NTs. Furthermore, in the armchair SiC-NTs, the bound exciton wavefunctions are more localized and also strongly cylindrically asymmetric

Interface energies of (100)_{YSZ} and (111)_{YSZ} epitaxial islands on (0001)_{alpha-Al_2O_3} substrates from first principles

We present an ab initio study of the interface energies of cubic yttria-stabilized zirconia (YSZ) epitaxial layers on a (0001)_{alpha-Al_2O_3} substrate. The interfaces are modelled using a supercell geometry and the calculations are carried out in the framework of density-functional theory (DFT) and the local-density approximation (LDA) using the projector-augmented-wave (PAW) pseudopotential approach. Our calculations clearly demonstrate that the (111)_{YSZ} || (0001)_{alpha-Al_2O_3} interface energy is lower than that of (100)_{YSZ} || (0001)_{alpha-Al_2O_3}. This result is central to understanding the behaviour of YSZ thin solid film islanding on (0001)_{alpha-Al_2O_3} substrates, either flat or in presence of defects.Comment: 25 pages, 5 figures, 10 tables, submitted to Physical Review